Unique New Year’s decorations made of paper, felt, plastic bottles, wine traffic jams and other materials.
Christmas tree toys from bushings
Hard: Handimania / YouTube
What do you need
- Sleeve;
- scissors;
- yarn.
How to do
Bend the bushing and cut across into several equal wide parts.
Hard: Handimania / YouTube
Separate a lot of identical segments from yarn.
Hard: Handimania / YouTube
Bright the details from the bushings. In one of them, stick a segment of the yarn folded in half.
Hard: Handimania / YouTube
Pass the tips of the thread into the resulting loop and tigh10.
Hard: Handimania / YouTube
Thus tie several more segments of the yarn. The threads that are on the sleeve, move so that the cardboard is not visible.
Hard: Handimania / YouTube
Complete the part of the sleeve with threads.
Hard: Handimania / YouTube
Divide the ends of the yarn into two parts. Twist each of them slightly and pull through the ring. The detailed process is shown in the video below. Straighten the thread.
Hard: Handimania / YouTube
Over the ring, bandage the yarn with another segment of the thread, forming a hat.
Hard: Handimania / YouTube
Contact the ends of the thread so that the fluffy pomp is turned out.
Hard: Handimania / YouTube
Simply make hats from the remaining parts of the sleeve in the same way. For hanging, tie the loop from the yarn on top.
What other options are there
Beautiful snowflakes will get from the bushings:
Another design:
You can make a New Year’s ball:
Santa Claus:
And even a mini -rogue with cocoa:
Fir -trees from ice cream sticks
Frame: Createwithjenn / YouTube
What do you need
- Ice cream sticks;
- ruler;
- pencil;
- scissors;
- glue on wood;
- toothpick;
- brush;
- brown paint;
- red paint;
- twine or other threads;
- White paint.
How to do
Cut the tips from four sticks so that two parts are 6.3 cm long and two parts 7.6 cm long. You also need three elements without rounding 3.2 cm long and one – 4.5 cm. Prepare two more whole sticks about 11 cm long. If you have other sticks, select the size of the eye on your own.
Frame: Createwithjenn / YouTube
On two whole details, make three marks at a distance of 1.9 cm from each other. Measure the first from the place where the rounding of the stick ends. Apply glue using toothpicks to the marks of one part.
Frame: Createwithjenn / YouTube
Place it on the rib and glue three short identical details to it, as shown in the photo.
Frame: Createwithjenn / YouTube
Lubricate the marks on the second whole stick and attach it to short details.
Frame: Createwithjenn / YouTube
When the workpiece dries, cover it with brown paint. The rest of the sticks – red. Let the coating completely dry.
Place four parts with roundings on top of short sticks: two long in the middle, and the other two at the edges. Leave small gels between them. Contact their straight edges with a whole stick. On the other hand, put the last detail.
Frame: Createwithjenn / YouTube
Gently glue red parts to the brown workpiece. Take a whole stick, it will not be needed anymore. Tie a piece of twine on both sides to a short red part so that a loop is obtained.
Frame: Createwithjenn / YouTube
Apply white paint to the edges of red parts.
The second part of the video instruction shows how to make an incredibly cool ski set of the same sticks:
What other options are there
Here sleds are done in the other way:
From this master class you will learn how to make a wooden snowman, Santa Claus and the New Year tree:
In this video there is also an angel, star, car and fence:
But very simple wooden snowflakes:
Christmas tree toys from paper
Shot: ABC TV / YouTube
What do you need
- Light paper;
- ruler;
- pencil;
- scissors;
- awl;
- golden rope;
- thin wire;
- glue;
- large light bead;
- Bright paper.
How to do
Cut the square with sides of 15 cm and a rectangle in size 15 x 8 cm out of paper.
Bend the edge of the square by about 1 cm. Then turn over and back in the opposite direction. Repeat until you add the whole part by accordion.
Shot: ABC TV / YouTube
A rectangle also collect in an accordion, starting from a narrow edge.
Shot: ABC TV / YouTube
Fold the big accordion from the square in half. In the middle of the bend, make a hole with an awl.
Shot: ABC TV / YouTube
Fold the second accordion in half and pierce in the same place.
Shot: ABC TV / YouTube
Cut the required number of rope to make a loop for suspension. Fold the tips together, form a loop and tie a knot. Remove the excess.
Shot: ABC TV / YouTube
Wrap the wire around the loop. Fold the ends together. Pass the wire through the hole of the big accordion.
Shot: ABC TV / YouTube
Pull out almost the entire rope. Then, in the same way, take the wire with a rope into the hole of a small accordion.
Shot: Socraftastic / YouTube
Cut the blanks of felt.
Shot: Socraftastic / YouTube
Fold one of them in half. Scissors make a zigzag edge on a small semicircle.
Shot: Socraftastic / YouTube
Put this part on another. The sides with chalk marks should be inside. Make the same patterned edge in the second part, cutting down the contour of the first. Then make the edge with openwork and on the outside of both pieces of felt.
Shot: Socraftastic / YouTube
For reliability, connect the parts for a while invisible or paper clips. Sew rounds from the outer edge. Leave a small hole in one place. Put the ribbon there so that the loop is obtained and sew.
Frame: Craftastic / YouTube
Then fold each part in half the glitter side inside. Glue from the inside from the line.
Frame: Craftastic / YouTube
Now connect two triangles of the same color. They need to glue them in the places where there are bends. In total, you will get eight blanks of each color.
Frame: Craftastic / YouTube
Lubricate the straight side of one part with glue and attach an element of a different color to it. Attach another six figures, alternating colors. The extreme should be different.
Frame: Craftastic / YouTube
Make another same part. Slightly straighten both of the glitter side.
Frame: Craftastic / YouTube
Glue the blanks together, connecting colored parts in the same way as in the previous step. Glue the places where Foamiran’s reverse side peeps on top and below. There is a detailed process in the video below.
Frame: Craftastic / YouTube
Cut from foamiran each color two small strips. Glue each in half.
Frame: Craftastic / YouTube
Twist one strip, lubricating it for reliability with glue. Attach a loop from the tape to the edge of the second strip and also form a glued “snail”.
Frame: Craftastic / YouTube
Smoke holes on the ball with glue from the inside. Insert prepared details there. They must bulge out about half.
Frame: Craftastic / YouTube
In the holes between the lower and upper parts of the ball, glue beads.
What other options are there
Another ball from Foamian is spiral:
Beautiful hearts:
Icicles:
And an elegant wreath:
Herbal toys from plastic bottles
Frame: Little Crafties / YouTube
What do you need
- Plastic bottle;
- decorative thin tape;
- scissors;
- stationery knife;
- glue gun;
- thin tapes of two different colors;
- glue for fabric – optionally.
How to do
Stick around the bottle of tape in two places above and below where narrowing begins. Between the inner edges of the tape, the bottle should be straight. Cut it into these lines.
Frame: Little Crafties / YouTube
The lower and upper parts of the bottle will no longer be needed. Divide the average cut -out piece into four identical rings.
Frame: Little Crafties / YouTube
Gently fall the edges of each of them with a warm iron. Apply a little hot glue to the part in one place and attach the tip of the ribbon at an angle.
Frame: Little Crafties / YouTube
Wrap the ring completely, always having a tape from the same angle. Cut the extra tip and fix the decor with glue.
Frame: Little Crafties / YouTube
Using the fabric glue, attach sequins to the tape. You can use hot glue, only you will have to apply very carefully so that it is not visible.
Wrap another ring with a ribbon of the same color and decorate with sequins. Wrap two other details with a ribbon of another shade, additionally decorating them does not need to be.
Frame: Little Crafties / YouTube
Lubricate one ring outside with hot glue in two opposite places. Place the part inside another of the same ring. Glue them so that they are located perpendicular to each other.
Frame: Little Crafties / YouTube
Put on the workpiece of the third ring and fix it at the intersection of the two previous ones – evenly between them.
Shot: Mr. Inventor / YouTube
Glue the bead to the top of the cork.
Shot: Mr. Inventor / YouTube
Make a small bow from a green ribbon and attach it in front under the bead.
Shot: Mr. Inventor / YouTube
At the back to the cork, attach the loop from the green tape.
Shot: Mr. Inventor / YouTube
From the red tape, make a large bow and glue it on the base of the loop.
The cork can be converted into a white bear:
Or gingerbread man:
Here’s how to make a pretty deer:
But a very simple Christmas tree:
Christmas tree toys from bushings
Hard: Handimania / YouTube
What do you need
- Sleeve;
- scissors;
- yarn.
How to do
Bend the bushing and cut across into several equal wide parts.
Hard: Handimania / YouTube
Separate a lot of identical segments from yarn.
Hard: Handimania / YouTube
Bright the details from the bushings. In one of them, stick a segment of the yarn folded in half.
Hard: Handimania / YouTube
Pass the tips of the thread into the resulting loop and tigh10.
Hard: Handimania / YouTube
Thus tie several more segments of the yarn. The threads that are on the sleeve, move so that the cardboard is not visible.
Hard: Handimania / YouTube
Complete the part of the sleeve with threads.
Hard: Handimania / YouTube
Divide the ends of the yarn into two parts. Twist each of them slightly and pull through the ring. The detailed process is shown in the video below. Straighten the thread.
Hard: Handimania / YouTube
Over the ring, bandage the yarn with another segment of the thread, forming a hat.
Hard: Handimania / YouTube
Contact the ends of the thread so that the fluffy pomp is turned out.
Hard: Handimania / YouTube
Simply make hats from the remaining parts of the sleeve in the same way. For hanging, tie the loop from the yarn on top.
What other options are there
Beautiful snowflakes will get from the bushings:
Another design:
You can make a New Year’s ball:
Santa Claus:
And even a mini -rogue with cocoa:
Fir -trees from ice cream sticks
Frame: Createwithjenn / YouTube
What do you need
- Ice cream sticks;
- ruler;
- pencil;
- scissors;
- glue on wood;
- toothpick;
- brush;
- brown paint;
- red paint;
- twine or other threads;
- White paint.
How to do
Cut the tips from four sticks so that two parts are 6.3 cm long and two parts 7.6 cm long. You also need three elements without rounding 3.2 cm long and one – 4.5 cm. Prepare two more whole sticks about 11 cm long. If you have other sticks, select the size of the eye on your own.
Frame: Createwithjenn / YouTube
On two whole details, make three marks at a distance of 1.9 cm from each other. Measure the first from the place where the rounding of the stick ends. Apply glue using toothpicks to the marks of one part.
Frame: Createwithjenn / YouTube
Place it on the rib and glue three short identical details to it, as shown in the photo.
Frame: Createwithjenn / YouTube
Lubricate the marks on the second whole stick and attach it to short details.
Frame: Createwithjenn / YouTube
When the workpiece dries, cover it with brown paint. The rest of the sticks – red. Let the coating completely dry.
Place four parts with roundings on top of short sticks: two long in the middle, and the other two at the edges. Leave small gels between them. Contact their straight edges with a whole stick. On the other hand, put the last detail.
Frame: Createwithjenn / YouTube
Gently glue red parts to the brown workpiece. Take a whole stick, it will not be needed anymore. Tie a piece of twine on both sides to a short red part so that a loop is obtained.
Frame: Createwithjenn / YouTube
Apply white paint to the edges of red parts.
The second part of the video instruction shows how to make an incredibly cool ski set of the same sticks:
What other options are there
Here sleds are done in the other way:
From this master class you will learn how to make a wooden snowman, Santa Claus and the New Year tree:
In this video there is also an angel, star, car and fence:
But very simple wooden snowflakes:
Christmas tree toys from paper
Shot: ABC TV / YouTube
What do you need
- Light paper;
- ruler;
- pencil;
- scissors;
- awl;
- golden rope;
- thin wire;
- glue;
- large light bead;
- Bright paper.
How to do
Cut the square with sides of 15 cm and a rectangle in size 15 x 8 cm out of paper.
Bend the edge of the square by about 1 cm. Then turn over and back in the opposite direction. Repeat until you add the whole part by accordion.
Shot: ABC TV / YouTube
A rectangle also collect in an accordion, starting from a narrow edge.
Shot: ABC TV / YouTube
Fold the big accordion from the square in half. In the middle of the bend, make a hole with an awl.
Shot: ABC TV / YouTube
Fold the second accordion in half and pierce in the same place.
Shot: ABC TV / YouTube
Cut the required number of rope to make a loop for suspension. Fold the tips together, form a loop and tie a knot. Remove the excess.
Shot: ABC TV / YouTube
Wrap the wire around the loop. Fold the ends together. Pass the wire through the hole of the big accordion.
Shot: ABC TV / YouTube
Pull out almost the entire rope. Then, in the same way, take the wire with a rope into the hole of a small accordion.
Shot: Socraftastic / YouTube
Cut the blanks of felt.
Shot: Socraftastic / YouTube
Fold one of them in half. Scissors make a zigzag edge on a small semicircle.
Shot: Socraftastic / YouTube
Put this part on another. The sides with chalk marks should be inside. Make the same patterned edge in the second part, cutting down the contour of the first. Then make the edge with openwork and on the outside of both pieces of felt.
Shot: Socraftastic / YouTube
For reliability, connect the parts for a while invisible or paper clips. Sew rounds from the outer edge. Leave a small hole in one place. Put the ribbon there so that the loop is obtained and sew.
Frame: Craftastic / YouTube
Then fold each part in half the glitter side inside. Glue from the inside from the line.
Frame: Craftastic / YouTube
Now connect two triangles of the same color. They need to glue them in the places where there are bends. In total, you will get eight blanks of each color.
Frame: Craftastic / YouTube
Lubricate the straight side of one part with glue and attach an element of a different color to it. Attach another six figures, alternating colors. The extreme should be different.
Frame: Craftastic / YouTube
Make another same part. Slightly straighten both of the glitter side.
Frame: Craftastic / YouTube
Glue the blanks together, connecting colored parts in the same way as in the previous step. Glue the places where Foamiran’s reverse side peeps on top and below. There is a detailed process in the video below.
Frame: Craftastic / YouTube
Cut from foamiran each color two small strips. Glue each in half.
Frame: Craftastic / YouTube
Twist one strip, lubricating it for reliability with glue. Attach a loop from the tape to the edge of the second strip and also form a glued “snail”.
Frame: Craftastic / YouTube
Smoke holes on the ball with glue from the inside. Insert prepared details there. They must bulge out about half.
Frame: Craftastic / YouTube
In the holes between the lower and upper parts of the ball, glue beads.
What other options are there
Another ball from Foamian is spiral:
Beautiful hearts:
Icicles:
And an elegant wreath:
Herbal toys from plastic bottles
Frame: Little Crafties / YouTube
What do you need
- Plastic bottle;
- decorative thin tape;
- scissors;
- stationery knife;
- glue gun;
- thin tapes of two different colors;
- glue for fabric – optionally.
How to do
Stick around the bottle of tape in two places above and below where narrowing begins. Between the inner edges of the tape, the bottle should be straight. Cut it into these lines.
Frame: Little Crafties / YouTube
The lower and upper parts of the bottle will no longer be needed. Divide the average cut -out piece into four identical rings.
Frame: Little Crafties / YouTube
Gently fall the edges of each of them with a warm iron. Apply a little hot glue to the part in one place and attach the tip of the ribbon at an angle.
Frame: Little Crafties / YouTube
Wrap the ring completely, always having a tape from the same angle. Cut the extra tip and fix the decor with glue.
Frame: Little Crafties / YouTube
Using the fabric glue, attach sequins to the tape. You can use hot glue, only you will have to apply very carefully so that it is not visible.
Wrap another ring with a ribbon of the same color and decorate with sequins. Wrap two other details with a ribbon of another shade, additionally decorating them does not need to be.
Frame: Little Crafties / YouTube
Lubricate one ring outside with hot glue in two opposite places. Place the part inside another of the same ring. Glue them so that they are located perpendicular to each other.
Frame: Little Crafties / YouTube
Put on the workpiece of the third ring and fix it at the intersection of the two previous ones – evenly between them.
Shot: Mr. Inventor / YouTube
Glue the bead to the top of the cork.
Shot: Mr. Inventor / YouTube
Make a small bow from a green ribbon and attach it in front under the bead.
Shot: Mr. Inventor / YouTube
At the back to the cork, attach the loop from the green tape.
Shot: Mr. Inventor / YouTube
From the red tape, make a large bow and glue it on the base of the loop.
The cork can be converted into a white bear:
Or gingerbread man:
Here’s how to make a pretty deer:
But a very simple Christmas tree: