You no longer have to constantly be distracted by the tunneling application.
How to configure automatic inclusion of VPN on Android Smartphone
To activate tunneling, you need to configure a specific VPN application and system parameters of the smartph1. But not every program supports such a function. If in your VPN service it is provided, act like this:
1. Open your VPN application.
2. Go to the section with the main program settings.
3. Select “Automatic inclusion of VPN”. Then mark the mode that will be activated at the time of connection to the Internet. You can indicate whether all applications are needed for tunneling or only for specific programs.
4. To configure the constant inclusion, the program will redirect you to the menu with VPN system parameters. Here, click on the application you installed and indicate that through it you must constantly communicate with the network. If desired, activate the interlocking option without VPN.
5. Confirm the settings. Now all the connections you have chosen will pass through the VPN service.
Disconnect tunneling for all programs can be in two ways: a pair of presses through the curtain or in the system settings.
In the first case, just expand the curtain with notifications and press the “Stop” or “Stop” button. The VPN service will stop processing the connections, while all applications will temporarily switch to a direct connection to the network. But the system will remind you that it is necessary to activate VPN back.
The second method will be needed if you decide to completely abandon tunneling. For deactivation, go again to the menu with the VPN system parameters, which was mentioned above. Disable all the toggle switches here.
How to configure automatic vpn on iPhone
This is possible only if the VPN application supports work with the system of built-in “teams”. If you have just that, follow the algorithm.
1. Find and run the “Team” program.
2. Go to the “Automation” tab and click on the “Create automation for yourself” button.
3. Sweet the list down and select the “Appendix” item.
4. The new automation settings menu will open. In the “Appendix” line, indicate the programs for which you need to include VPN. Mark the option “Open”.
5. Click “Next” and in the search dial VPN. The icon of your application and the name of the command should appear. It can be called differently, it depends on the VPN program that you use. For example, in the case of Adguard VPN, you will see “set up a VPN connection”.
With the release of iOS 16.4 In the “Team” appendix, a new built -in script “Configure VPN” appeared. At step 5, you can immediately choose this command and specify the VPN service you need. Now it is not necessary to deal with the options for actions for different applications.
6. Select the “enable” value for the script, then disconnect the points “ask before the launch” and “notify the launch”. Click “Ready”.
Next, you need to set almost the same algorithm for automatic shutdown of VPN. To do this, follow the following steps:
- Run the “Team” program again.
- Go to the “Automation” tab, slip “Create automation for yourself”.
- Open the “Appendix” item.
- In the “Appendix” line, indicate the programs when the closure of which you need to deactivate VPN. Mark the option “Closed”.
- Click “Next” and in the search Enter VPN. Choose your VPN service and team name again. For different programs, they may vary. So, in the list of available actions, one variable with two values is sometimes displayed, and sometimes two separate directives. In iOS 16.4 you can immediately select the “set the VPN” script and specify the VPN service you need.
- In the fresh version of the iOS, the script will look like “disconnect from the VPN (application name)”. In previous versions you need to select the “Stop VPN” or “Turn off VPN” commands. Next, disconnect the points “Ask before the launch” and “Srise the launch”. Click “Ready”.
UPD. Updated the text on March 29, 2023. Added new information about iOS 16.4.
How to configure automatic inclusion of VPN on Android Smartphone
To activate tunneling, you need to configure a specific VPN application and system parameters of the smartph1. But not every program supports such a function. If in your VPN service it is provided, act like this:
1. Open your VPN application.
2. Go to the section with the main program settings.
3. Select “Automatic inclusion of VPN”. Then mark the mode that will be activated at the time of connection to the Internet. You can indicate whether all applications are needed for tunneling or only for specific programs.
4. To configure the constant inclusion, the program will redirect you to the menu with VPN system parameters. Here, click on the application you installed and indicate that through it you must constantly communicate with the network. If desired, activate the interlocking option without VPN.
5. Confirm the settings. Now all the connections you have chosen will pass through the VPN service.
Disconnect tunneling for all programs can be in two ways: a pair of presses through the curtain or in the system settings.
In the first case, just expand the curtain with notifications and press the “Stop” or “Stop” button. The VPN service will stop processing the connections, while all applications will temporarily switch to a direct connection to the network. But the system will remind you that it is necessary to activate VPN back.
The second method will be needed if you decide to completely abandon tunneling. For deactivation, go again to the menu with the VPN system parameters, which was mentioned above. Disable all the toggle switches here.
How to configure automatic vpn on iPhone
This is possible only if the VPN application supports work with the system of built-in “teams”. If you have just that, follow the algorithm.
1. Find and run the “Team” program.
2. Go to the “Automation” tab and click on the “Create automation for yourself” button.
3. Sweet the list down and select the “Appendix” item.
4. The new automation settings menu will open. In the “Appendix” line, indicate the programs for which you need to include VPN. Mark the option “Open”.
5. Click “Next” and in the search dial VPN. The icon of your application and the name of the command should appear. It can be called differently, it depends on the VPN program that you use. For example, in the case of Adguard VPN, you will see “set up a VPN connection”.
With the release of iOS 16.4 In the “Team” appendix, a new built -in script “Configure VPN” appeared. At step 5, you can immediately choose this command and specify the VPN service you need. Now it is not necessary to deal with the options for actions for different applications.
6. Select the “enable” value for the script, then disconnect the points “ask before the launch” and “notify the launch”. Click “Ready”.
Next, you need to set almost the same algorithm for automatic shutdown of VPN. To do this, follow the following steps:
- Run the “Team” program again.
- Go to the “Automation” tab, slip “Create automation for yourself”.
- Open the “Appendix” item.
- In the “Appendix” line, indicate the programs when the closure of which you need to deactivate VPN. Mark the option “Closed”.
- Click “Next” and in the search Enter VPN. Choose your VPN service and team name again. For different programs, they may vary. So, in the list of available actions, one variable with two values is sometimes displayed, and sometimes two separate directives. In iOS 16.4 you can immediately select the “set the VPN” script and specify the VPN service you need.
- In the fresh version of the iOS, the script will look like “disconnect from the VPN (application name)”. In previous versions you need to select the “Stop VPN” or “Turn off VPN” commands. Next, disconnect the points “Ask before the launch” and “Srise the launch”. Click “Ready”.
UPD. Updated the text on March 29, 2023. Added new information about iOS 16.4.